The construction of epoxy resin-coated steel bars is not very complicated. According to the pilot project situation and the application experience abroad, my country's construction team of general quality can be competent after technical clarification. However, because the resin coating on the surface of the epoxy resin-coated steel bar is easily damaged, in order to avoid the coating damage caused by the extrusion and friction between the sling and the steel bar, it is necessary to use high-strength nylon rope or hemp rope as the sling ; Epoxy resin-coated steel bars need to be covered with black plastic cloth in order to avoid fading and aging of the coating caused by ultraviolet radiation during storage. Therefore, in the process of transportation and storage, it is inevitable to increase a part of labor costs and material costs. In the processing of epoxy resin coated steel bars, in order to protect the coating, it is necessary to use bent special sleeves, and add a felt blanket on the surface of the operating platform; epoxy resin coated steel bars are also required during the connection process The construction process is slightly more complicated than ordinary steel bars; in the construction process, the construction of epoxy resin-coated steel bars is not very complicated. Our country has confirmed according to the pilot project situation and foreign application experience: the general quality construction team, after technical disclosure Can be competent. However, because the resin coating on the surface of the epoxy resin-coated steel bar is easily damaged, in order to avoid the coating damage caused by the extrusion and friction between the sling and the steel bar, it is necessary to use high-strength nylon rope or hemp rope as the sling ; Epoxy resin-coated steel bars need to be covered with black plastic cloth in order to avoid fading and aging of the coating caused by ultraviolet radiation during storage. Therefore, in the process of transportation and storage, it is inevitable to increase a part of labor costs and material costs. In the processing of epoxy resin coated steel bars, in order to protect the coating, it is necessary to use bent special sleeves, and add a felt blanket on the surface of the operating platform; epoxy resin coated steel bars are also required during the connection process It is a slightly more complicated construction process than ordinary steel bars; during the construction process, the damaged parts of the steel bar coating need to be repaired with a special repair liquid. These aspects all need to increase some construction costs. In short, in the entire construction process, due to the use of epoxy resin coated steel bars, the need for increased construction costs increased the overall construction cost by about 25%.